Get compliant today — call us: (855) 920-5202

How to Organize SDSs for Aerosols, Brake Cleaners, and Solvents in an Auto Shop

Aerosols and solvents are the hardest products to keep track of in an auto shop. They arrive in mixed cases, technicians buy their own favorites, sales reps leave samples, and the same brand can come in three formulations with nearly identical labels. When an OSHA inspector picks a can off a cart and asks for its Safety Data Sheet, these are the products most likely to be missing.

Quick answer: Organize SDSs by product identifier, not by brand or category alone. Keep one SDS for each distinct product on site, match it to the exact name and manufacturer on the can, file it by the work area where the product is used, and make it reachable from every bay during every shift. Make the parts counter the checkpoint so no new aerosol goes into use without an SDS.

This matters because missing and inaccessible SDSs are among the most common HazCom findings. Hazard Communication was second on federal OSHA's Top 10 Most Frequently Cited Standards list for fiscal year 2025. For the full compliance picture, see our OSHA HazCom compliance guide for auto repair and body shops.

Table of contents

  • Why are aerosols and solvents so hard to track?
  • Do I need a separate SDS for every brake cleaner?
  • How should SDSs be organized in a shop?
  • How do I match an SDS to the right can?
  • What should I check on an aerosol SDS?
  • How do I keep technicians' personal products under control?
  • What about parts-washer solvent?
  • How does Helios Comply help?
  • Frequently asked questions
  • Sources

Why are aerosols and solvents so hard to track?

Aerosols create more SDS gaps than any other product type in a typical shop for a few reasons.

  • High turnover. Cans are used up quickly and reordered from whoever has stock.
  • Many near-duplicates. A single manufacturer may sell chlorinated brake cleaner, non-chlorinated brake cleaner, a low-VOC version, and a version for specific state markets. Each is a different product with a different SDS.
  • Multiple suppliers. Parts stores, tool trucks, distributors, and online orders all bring in different brands.
  • Personal purchases. Technicians often buy a preferred penetrating oil or contact cleaner and leave it in their toolbox.
  • Small labels. Product identifiers and manufacturer names can be hard to read, especially once a can is greasy.

The result is a binder that was correct when someone built it and has drifted ever since.

Do I need a separate SDS for every brake cleaner?

You need one SDS for each distinct hazardous product, identified by its product identifier. Under 29 CFR 1910.1200(g)(1), employers must maintain an SDS for each hazardous chemical they use.

Situation SDSs needed
48 cans of the same brake cleaner One
Chlorinated and non-chlorinated versions from one brand Two
Same product sold in a 14 oz can and a 1 gallon jug Usually one, if the product identifier and SDS are the same
Same brand name, different state-compliant formulas Usually two, because the formulations differ
Private-label product from a distributor One, from the distributor or private-label supplier

When in doubt, compare the product identifier and product code on the label to the SDS Section 1. If they do not match, get the right sheet.

How should SDSs be organized in a shop?

OSHA does not prescribe a filing system. It requires that SDSs be readily accessible during each shift while employees are in their work areas. The best organization is the one a technician can use under pressure, with a skin exposure or a spill in front of them.

Three approaches work well in auto shops:

By work area

File SDSs by where products are used: general bays, lube pit, detail bay, paint room, parts room, service vans. A technician at the lube pit looks in the lube pit section. This mirrors how OSHA thinks about access and makes area-based training easier.

By product type within each area

Within each area, group by category: aerosol cleaners, lubricants, fluids, solvents, adhesives, and paint products. This helps when a tech knows what a product does but cannot read the label.

Alphabetical master index

Keep a master list sorted alphabetically by product name, with the manufacturer and location. This is your chemical inventory, which the written HazCom program must include.

An electronic system can do all three at once, letting technicians search by name, browse by location, or scan a code posted at the bay.

How do I match an SDS to the right can?

Matching is where most shop binders fail. Use the following details from the can, in this order:

  1. Product identifier. The product name or number on the label. It must match the SDS Section 1.
  2. Manufacturer or responsible party. Name, address, and phone number on the label should match the SDS.
  3. Product code or SKU. Often printed near the barcode. Useful when names are similar.
  4. Hazard pictograms and signal word. A non-chlorinated brake cleaner will usually show the flame pictogram and "Danger." If the label and SDS hazard information do not match, you probably have the wrong sheet.

Do not rely on the color of the can or a remembered product name. Manufacturers change formulations, and an older SDS for a reformulated product can list different ingredients and hazards. For how this changes over time, see how AI keeps your SDS library up to date when chemical formulations change.

What should I check on an aerosol SDS?

When you add an aerosol or solvent SDS to your library, review a few sections so you know what you are dealing with and can train technicians.

SDS section What to look for in a shop
Section 2, Hazards identification Flammability, aerosol category, health hazards such as skin or eye irritation, drowsiness, or organ toxicity
Section 4, First-aid measures What to do for eye contact, skin contact, and inhalation
Section 7, Handling and storage Heat limits, storage away from ignition sources, ventilation
Section 8, Exposure controls and PPE Gloves, eye protection, and ventilation needs
Section 9, Physical properties Flash point and vapor information
Section 10, Stability and reactivity Incompatible materials
Section 11, Toxicological information Short- and long-term health effects

Chlorinated versus non-chlorinated

Chlorinated brake cleaners have historically used solvents such as tetrachloroethylene, which are generally nonflammable but carry significant health hazards. Non-chlorinated brake cleaners commonly use solvents such as acetone, heptane, or other hydrocarbons, which are extremely flammable. Neither is automatically the safe choice. The SDS tells you which hazards to control.

Federal EPA rules under the Toxic Substances Control Act have restricted certain solvents, and some states limit chlorinated products. If your supplier changes formulations to meet those rules, you need the new SDS.

Aerosol classification under the 2024 update

OSHA's 2024 HazCom update revised the aerosol hazard class to include nonflammable aerosols as a category. Expect new SDSs and labels from manufacturers as products are reclassified. Replace older sheets when updated versions arrive.

How do I keep technicians' personal products under control?

Personal products are a real gap. A technician's own can of penetrating oil in a toolbox is still a hazardous chemical in your workplace, and you are responsible for its SDS.

Practical steps that work:

  • Set a simple rule. Any chemical used on the job must be on the shop inventory. Put it in the written program and in training.
  • Offer an approved list. If technicians can request products for the approved list, they are less likely to bring in their own.
  • Make adding a product easy. If getting an SDS into the system takes a phone scan rather than a form, compliance goes up.
  • Check toolboxes during walk-throughs. A monthly bay walk catches products before an inspector does.

What about parts-washer solvent?

Parts washers often come through a service company that delivers fresh solvent and removes spent solvent. You still need the SDS for the solvent in the machine, and the washer should be identified with its contents and hazards.

Ask the service provider for the SDS on the first visit and whenever the product changes. Because the parts washer is a stationary container, you may identify it with a sign or placard under 1910.1200(f)(7), as long as the sign identifies the container and communicates the required hazard information. The service company's employees must also be informed of hazards they may encounter in your shop, as part of the multi-employer provisions in your written program.

How does Helios Comply help?

Keeping an aerosol and solvent library current is a matching problem. Each can has to point to the right sheet, and the library has to change when the shelf changes.

Helios Comply lets shops search a large SDS database by product name or manufacturer, add sheets to a location-based library, and give technicians QR-code access from any bay, including offline access when the signal is weak. AI-assisted digitization helps convert existing paper binders, and the platform can generate GHS secondary container labels from the SDS for spray bottles and shop containers. See what SDS auto-classification is and why it matters for large inventories.

The shop still owns its inventory, training, and written program. Start a free trial, call (855) 920-5202 for setup help, or compare SDS binder options.

This article provides general compliance information, not legal advice. Check applicable federal OSHA requirements and any state-plan requirements for your workplace.

Frequently asked questions

Can I use a generic brake cleaner SDS for all brands?

No. Each SDS must correspond to the specific product in use. Different brands, and often different versions of the same brand, have different formulations and hazards.

Where should I keep the SDS for products in service vans?

The SDS must be readily accessible to employees where they work. For mobile technicians, that usually means electronic access on a phone or tablet with offline capability, or a compact binder in the van.

Do I need SDSs for sample cans left by sales reps?

Yes, if the sample is a hazardous chemical and employees use it at work. Ask the rep for the SDS when you accept the sample, or do not put it into use.

Sources

  • 29 CFR 1910.1200, Hazard Communication
  • OSHA Brief: Hazard Communication Standard, Safety Data Sheets
  • OSHA Hazard Communication Standard Final Rule, 2024
  • OSHA Top 10 Most Frequently Cited Standards, Fiscal Year 2025
  • EPA, Risk Management for Perchloroethylene (PCE) under TSCA
×

    We'll Call You Within the Hour


    Fill in your details and a compliance expert will reach out to walk you through the platform.


    No sales pressure. We'll show you the platform and answer your questions.

    Scroll to Top

    Order Your SDS Book

    Fill in your details and we'll call you back within 30 minutes to complete your order.

      📞 We'll call you back within 30 minutes